M65 Flange, Grip Options, Lens boards etc.

M65/M67 Adjustable Flange

M65/M77 Flange helps to make smoother lens changes between cameras. The flanges are machined and are two piece clamping design with 6 screws in front surface. They will come either with the camera/cone or can be purchased separately. Since all helicoids are engraved and thread starts are different between different helicoids, this flange enables easy adjustment of the rotation of the helicoid in order for the top of the engraved markings is oriented correctly. Rear clamping ring is of the split design in order to be compatible with 617 and 612 cones since they're narrower on the back side.

The same flange can be used with any of the lens boards we have already in our offer. The same same lens can be used on any of the listed cameras and can be also transferred to almost any lens board that is large enough to accept the flange or M65/M77 thread. Our lens boards can also come with 3d printed threads for smaller lens boards where the full sized flange wouldn't fit.

Grip and Pistol Grip options

CCB 617C and 612C have integrated small and large grip options. Larger grip can accept shutter cable release. Smaller grip is required on 612C if Graflok attachment is going to be used. Shutter cable grip will in this case interfere with 612C's Graflok attachment and 4x5 camera it's used on.

Pistol Grip can be used on any camera in this campaign (8x10 might be too big to handle this way but the grip can support the weight). This grip is extremely strong and has a 1/4" threaded stud that goes through the whole length of the grip and is tightened with large 25mm nut on the base of the grip. It comes with anti-rotation interface specific for any of the cameras it's used on. With the anti-rotation interface accidental rotation chances are reduced to zero.

LF Lens Boards Available

In order to retain easy compatibility with your existing LF camera there is a large number of existing lens boards listed on our website plus some that are not listed yet (please inquire). With M65/M77 flange mounted on the lens board or lens board with integrated 3d printed thread, moving one of the lenses from cameras in this campaign back to your existing LF camera will be seamless.

Some of the lens boards we offer:

1. Sinar
2. Cambo 45
3. Cambo 23
4. Linhof Technika III
5. Linhof Technika IV and newer
6. Linhof Technika III 6x9
7. Linhof Technika 5x7
8. Linhof Kardan
9. Linhof Kardan Color
10. Toyo 45A
11. Toyo Omega View
12. Horseman 80x80mm
13. Graflex Model C 4x4" - Deardorff and others
14. Graflex 2x3
15. Graflex 4x5 Pacemaker
16. Graflex 2x3 Pacemaker
and more...