Sinar F, F1 and F2 Point and Shoot Sinar Handy compatible conversion components, Tripod adapter, Cold shoe and Lens cones

These are all adapters required to convert Sinar F, F1 and F2 format frames to Point and Shoot camera similar and compatible with Sinar Handy version.

This is updated version that doesn't come with pictured 3d printed scale on the helicoid. Upgrade option to add calibrated laser engraving on the helicoid is available.

612/617 and 4x5, 5x7 and 8x10 Large Format cameras available as well. Please contact us if you need any additional information.

Sinar camera components, lens with shutter and helicoid not included. Can be included in custom order if requested. Subject to availability.

1. Tripod adapter (includes adapter, 2 T-nuts and 2 hex socket bolts)
2. Single cold shoe
3. Triple cold shoe
4. Custom lens cone only - no lens no helicoid
5. Custom lens cone 47-150mm with M65 helicoid and lens board - rear lens element diameter of 61mm maximum (lens not included)
6. Custom lens cone 47-150mm with M77 helicoid and lens board - rear lens element diameter of 72mm maximum (lens not included)
7. Lens cone upgrade to 240mm focal length (lens or cone not included - upgrade only)
8. Helicoid laser engraving upgrade - Calibrated scale with DOF and Hyperfocal markings. Enables precise distance and hyperfocal focusing. To increase accuracy, laser distance measure can be used. Focusing with marked Hyperfocal points provides fast focusing in the marked ranges.
9. Pinhole cone 40mm focal length with 0.25mm pinhole insert. Can be customized to different focal lengths if needed.

We will need detailed information about the lens you're planning to use in order to make your conversion kit to the order. Shutter brand, size and the exact inscription on the lens. Small naming differences in some cases correspond to changes in lens specifications that need to be accounted for during the process of producing the custom conversion kit.

• Tripod adapter mount in the bottom groove of Sinar F, F1 or F2 standards. In order to remove the standard shift lever needs to be loosened and end screw removed. Two custom T nuts are inserted in the t nut slot on the bottom. Finally tripod foot is attached with included hex socket bolts. T-nuts are custom machined and tripod foot is 3d printed from ABS with standard 1/4" metal insert. It is not compatible with Sinar P standards - please inquire if you need Sinar P based conversion kit. It's available.
• Single and triple cold shoes are mounted in the side and top accessory rail grooves. T-slot nuts are machined from brass and inserted in the round hole at the end of the groove. M2 Phillips head screws are attaching bracket to the format frame. The bracket is 3d printed from ABS and T-nuts are machined from brass. Cold shoe is anodized aluminum assembly with tightening screw.
• Custom lens cones are made for the specific lenses. It comes either only as a cone or in a complete kit with helicoid and shutter adapter lens board. M65 and M77 helicoids available. Pictured setup is for Schneider Super Angulon 90mm f8 lens in #0 shutter (LENS IS NOT INCLUDED). 

Please contact us if you have any questions or customization requests.