These are all adapters required to convert Sinar F, F1 and F2 format frames to Point and Shoot camera similar and compatible with Sinar Handy version.
Sinar camera components, lens with shutter and helicoid not included. Can be included in custom order if requested. Subject to availability.
- Tripod adapter (includes adapter, 2 T-nuts and 2 hex socket bolts)
- Single cold shoe
- Triple cold shoe
- Custom lens cone only - no lens no helicoid
- Custom lens cone 47-150mm with M65 helicoid and lens board (lens not included)
- Custom lens cone 47-150mm with M77 helicoid and lens board (lens not included)
- Tripod adapter mount in the bottom groove of Sinar F, F1 or F2 standards. In order to remove the standard shift lever needs to be loosened and end screw removed. Two custom T nuts are inserted in the t nut slot on the bottom. Finally tripod foot is attached with included hex socket bolts. T-nuts are custom machined and tripod foot is 3d printed from ABS with standard 1/4" metal insert. It is not compatible with Sinar P standards.
- Single and triple cold shoes are mounted in the side and top accessory rail grooves. T-slot nuts are machined from brass and inserted in the round hole at the end of the groove. M2 Phillips head screws are attaching bracket to the format frame. The bracket is 3d printed from ABS and T-nuts are machined from brass. Cold shoe is anodized aluminum assembly with tightening screw.
- Custom lens cones are made for the specific lenses. It comes either only as a cone or in a complete kit with helicoid and shutter adapter lens board. M65 and M67 helicoids available. Pictured setup is for Schneider Super Angulon 90mm f8 lens in #0 shutter.
Please contact us if you have any questions or customization requests.